Odessa – Midland, Texas • Open Everyday 7am-8pm

Dbx Dbxzc4 V | Wall Mount Zone Control for DriveRack and ZonePro Devices


4 in stock

SKU: DBXZC4V Category:


The Zone Controllers offer extended utility to the DriveRack?? and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume, and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.

The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for .

All information is subject to change without notice.

Recommended for:

More Details

The remote device shall provide programmable program selection via contact closures for the dbx DriveRack 220i and 260 devices. The remote device shall also provide contact closure programmable source selection, page assignment, or scene selection for the dbx ZonePRO devices. The remote device shall have DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors. The device shall be a dbx ZC-4 remote controller.

Connectors(2) RJ-45Series WiringMaximum Cable Length varies with number of Zone Controllers. For Example, Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft.Parallel Wiring using ZC-BOBUp to Six Zone Controllers: 1000 ft.Parallel Wiring CableCAT5 or CAT5E with 28.6 Ohm/M (Ohm/1000ft.) nominal DCR and rated VW-1 or higher. Safety Agency CertificationsUL 60065, IEC 60065, EN 55013, E60065

Additional information


Brand New






AVTELCOM LLC International


There are no reviews yet.

Be the first to review “Dbx Dbxzc4 V | Wall Mount Zone Control for DriveRack and ZonePro Devices”

Your email address will not be published.